TANK BAG INSTALLATION INSTRUCTIONS
Strap Base Tank Bags (Compact Tank Bag, Rider Tank Bag, Expander Tank Bag)
Thoroughly wipe and clean the tank of your motorcycle. Ensure the bottom mounting base protective material is free from any external debris or metal particles as this may scratch the tank whilst in use. If extra protection is wanted you can use a protective cloth between the tank and the bag to prevent
Remove or raise seat of the bike. Choose a secure part of the frame under the seat to thread the mounting strap through. Guide the male end of the buckle through the loop strap and then lead the male strap up the tank and clip into the female clip.
For the next process locate the mounting straps with 2 male clips. Wrap straps around the front frame/ steering posts. Make sure the straps do not come close or interfere with any wires or cables. After all mounting straps are attached make sure that no part of the bag or straps interfere with the steering. If any problems occur readjust the bag accordingly.
Magnetic Base Tank Bags (Compact Tank Bag, Rider Tank Bag, Expander Tank Bag)
Thoroughly wipe and clean the tank of your motorcycle. Ensure the bottom mounting base protective material is free from any external debris or metal particles as this may scratch the tank whilst in use. If extra protection is wanted you can use a protective cloth between the tank and the bag to prevent scratching.t
All Cyle Case Magnetic Tank bags are intended for use on motorcycles with metal tanks. Magnetic Tank Bags will NOT work on motorcycles with plastic tanks. Center the bag over top of the tank and prepare to set it down. Please make sure all magnets are secure and touching the tank.
TAIL BAG INSTALLATION INSTRUCTIONS
Tail Bags (Rider Tail Bag)
Center the Tail Bag in the center of the tail-end section of the motorcycle with the carrying handle facing the rear of bike.
The Tail Bag comes with 3 Mounting Straps: 1 Rear Mounting Strap and 2 Side Loop Straps. Secure the loop side of the Side Loop Straps to a structural part of the bikes frame and then connect the clip to the D-rings on the Tail Bag. After this, secure the Rear Mounting Strap across the tail-end section of the bike and attach the hooks to the D-rings.
After all Mounting Straps are applied, please recheck that the rear and side straps are securely tightened. Readjust if necessary. Please make sure the Tail Bag is positioned away from an interference with the exhaust pipes or any moving parts of the motorcycle.
SADDLEBAGS INSTALLATION INSTRUCTIONS
Saddlebags (Rider Saddlebags)
Place Saddlebags over the fender of the bike and adjust the Velcro straps, on some bikes you will be able to position the Velcro straps under the seat. Make sure the protective pads are against the tail section, Velcro straps may need to be readjusted to the height you want the bags to hang from the seat.
Insert the hard plastic Saddlebagstiffener in the bottom of the bag and secure it with Velcro loops. Thentuck the ends of the stiffener under the inside opening on each side of thebag. Once the stiffener is properly in place it will help hold the shapeof the bags.
The Saddlebags come with 4 MountingStraps/Loop Straps. On each strap, one side has a loop and the other side has aclip that attaches to the D-Rings on the bags. Secure the loop side to astructural part of the bikes frame and then connect the clip to the D-Rings onthe front of the Saddlebags.
RIDER SADDLEBAGS & RIDER TAIL BAG COMBINATION
Quick Release Bag Combination The Rider Saddlebags and Rider Tail Bag create the ideal "quick release" bag combination. 4 male clip located in hidden pockets underneath the Rider Tail Bag connect easily and conveniently to the 4 female buckles located on the top part of the Rider Saddlebags. This easy to use attachment system allows extremely easy attachment of the Rider Tail Bag to the Rider Saddlebags saving you time as well as giving you matching bags on your bike that complement each other in look and in function..

TANK BAGS
Cycle Case is not responsible for products mounted incorrectly, it is the users responsibility for correct installation and to follow the above instructions. Please do not exceed the weight limit of 5lbs for all tank bags. Also, make sure all bags are securely fastened and the bag is centered on the tank.
TAIL BAG
Cycle Case is not responsible for products mounted incorrectly, it is the users responsibility for correct installation and to follow the above instructions. Please do not exceed the weight limit of 10lbs for all tail bags. Also, make sure all bags are securely fastened and the bag is centered on the rear seat.
SADDLEBAGS
Cycle Case is not responsible for products mounted incorrectly, it is the users responsibility for correct installation and to follow the above instructions. Please do not exceed the weight limit of 15lbs for each bag. Also, please make sure all bags are securely fastened and attached to your bike.

PLEASE RIDE CAUTIOUSLY. DO NOT ATTEMPT TO OPEN OR USE BAG WHILE RIDING.


LUGGAGE INSTALLATION AND SAFETY
•  Installing luggage or placing mounting straps near the exhaust system can create a fire hazard

•  Never install luggage or mounting straps closer than 2 inches from the exhaust, muffler or other heat source